Inverter welding station tech140 115 amps complete in case - Ribitech
Indoor Discount presents you his product: Inverter soldering station tech140 115 amps complete in case - Ribitech
Data sheet
-
Consumptionless than 0.10 kw/h
-
Eco-participation in euros0,42
ARC welding stations with INVERTER technology are light, compact and easy to use, allowing them to be used for ironwork, boiler making, piping, etc... They have an MMA welding process with coated electrode.
They are composed of an on/off switch - Insulation class H, a knob for adjusting the welding intensity according to the diameter of the electrodes as well as a thermal protection with LED indicator.
They have 3 automatic functions:
- Hot start: the starting current has a value higher than the desired value, to help the ignition of the arc
- Arc force: to avoid short-circuit - if the electrode does not approach the weld too quickly
- Anti-sticking: the current value decreases immediately to the value required so that the electrode can be
weld removal
>> Single-phase substation 230 V ~ 50/60 Hz
>> Power supply cable approx. 2.10 m
The Tech140 welding unit model has a power consumption of 4.1 KVA, welding current 5-130 A. Its no-load voltage is 90 V - duty cycle 115 Amp at 55%. Finally, it has a protection class IP21 S - Ø electrodes 1.6 to 3.2 mm.
Each case includes:
- 1 earth clamp
- 1 electrode clamp
- 1 brush with hammer for slag
- 1 hand soldering mask
- 1 carrying strap
>> Total weight of the suitcase : 5.5Kg
-
-
Consumptionless than 0.10 kw/h
-
Eco-participation in euros0,42
-
Trier ses déchetsNos emballages et/ou nos produits peuvent faire l’objet d’une consigne de tri. Plus d’info.
-
