Indoor discount offers you the Prosystemaqua controller that measures and adjusts PH and EC values, as well as temperature.
PH and EC are important measurements for a flourishing culture, with Prosystemaqua horticultural control systems, it is easy to have stable measurements.
The injector allows adjustment of the set values.
The controller displays the selected program in real time.
A filter allows for clean water, for better accuracy of measurements.
The pumps can be used independently with a flow rate of 0 to 4 L/h.
Base of the support in methacrylate
The water recirculation and irrigation pump has 2 independent programs.
Instructions:
The water recirculation pump must be in synchronization with the PH and EC controller, for the passage of the water in the collector.
When the PH measurement is stable, the controller program allows a choice between up and down mode. It is necessary to foresee the calibration and to have ajust the right amount of power to the PH pump.
It is necessary to plan the calibration and to make the measurement of the EC, then it is preferable to make a verification of the alarm, time, air, and temperature compensation, before the calibration.
It is necessary adjust equivalent power to pumps a and b.
The measurement and conductivity of PH, is determined by the probe, the value of each pump is displayed on the screen.
The PH-EC adjustment goes through the controller injectors and the suction filter filter.
Choose the PH and EC measurements for the nutritional injection through the select PH and EC measurements for nutritional injection through the manifold injection valves and an adjustment in the tank.
The Prosystemaqua can be used for all horticultural systems.
An addition to the cooling and heating controller system is possible.
The connection must be made between the controller and the pump it is necessary to connect the irrigation controller before selecting the program.
The connection must be made between the controller and the cooling or heating system before selecting the program.
Keep the filling system probe in the tank.
Photo not contractual.
