Heat pump HeaterMax Inverter 40 - Ubbink (delivery: 15 days)
Heat pump HeaterMax Inverter 40 - Ubbink (delivery: 15 days)
Heat pump HeaterMax Inverter 40 - Ubbink (delivery: 15 days)
Heat pump HeaterMax Inverter 40 - Ubbink (delivery: 15 days)
Heat pump HeaterMax Inverter 40 - Ubbink (delivery: 15 days)
Heat pump HeaterMax Inverter 40 - Ubbink (delivery: 15 days)
Heat pump HeaterMax Inverter 40 - Ubbink (delivery: 15 days)
Ubbink

Heat pump HeaterMax Inverter 40 - Ubbink

Indoor Discount presents you his product: HeaterMax Inverter 40 heat pump - Ubbink

Read more
€1,849.00

Delivery times : 4 week(s)

Data sheet

  • Consumption
    over 3 kw/h
  • Type
    Other pump

  • Water at the right temperature all year round with the Heatermax inverter heat pump


    It recovers heat from the outside air and transfers it to the pond water.
    In a closed circuit the cooling gas (R32) circulates in a hermetically sealed manner.

    The heat pump control unit ensures that the speed of the compressor and blower can be continuously adapted to the heat demanded.

    What are the advantages of the heatermax inverter 40 heat pump?

    Titanium heat exchanger (for chlorinated and salt water), corrosion-free
    Environmentally friendly (approx. 80% of the energy required to heat water comes from the air)
    R32 refrigerant
    Can be operated without bypass
    Fully automatic flow controller
    Very quiet operation thanks to high-quality compressor and low-noise fan
    Anti-vibration rubber pads
    Protective cover included

    Technical data :

    Voltage / Frequency / Phase: 220-240V ~ 50Hz / 1 phase
    Rated current: 7.4 A
    Recommended fuse: 11 A
    Power supply cable: H07RN-F 3x2.5mm²
    Protection class: I
    Type of protection: IP X4

    Heating performance condition 1: Air 28°C / Water 28°C / Humidity 80 %

    Heating capacity: 9.5 - 3.2 kW
    Electricity consumption: 1.06 - 0.43 kW
    Coefficient of performance (COP): 7.5 - 5.2

    Heating performance condition 2 : Air 15°C / Water 26°C / Humidity 70 %

    Heating capacity: 3.9 - 3.6 kW
    Electricity consumption: 1.67 - 0.42 kW
    Coefficient of performance (COP): 8.6 - 5.7

    Maximum tank volume: 0-20 m3

    Minimum water flow rate: 2.9 m³/h
    Water pressure: 1.5 m³/hmaximum water pressure: 12 kPa
    Water temperature (operating range): 15°C - 35°C
    Air temperature (operating range): 7°C - 43°C
    Inlet / outlet: 50 mm
    Compressor (type / brand): Compressor Inverter GREE LAMDA
    Fan direction: horizontal
    Noise level at 1 m distance : 39-42 dB(A)
    Noise level at 10 m distance: 44-51 dB(A)
    Housing: galvanized stainless steel
    Heat exchanger: rotating titanium tube (in PVC housing)
    Refrigerant R32: 760 g
    PRG index: 675
    CO2 equivalent: 0.51 t
    Dimensions: 969 x 360 x 551 mm
    Net weight: 49 kg

    Supplied accessories

    Winter cover: 1
    Skids (anti-vibration): 4
    10m extension for LCD connection: 1
    Water supply connection kit 50 mm: 2
    Hose for condensation water: 2
    Hose holder: 2

    The ubblink Heatermax converter 40 heat pump has 3 modes:

    Silent mode

    Low compressor and blower speed
    Ideal for maintaining the water temperature
    Very low power consumption and noise emission
    Automatic switchover to Smart mode when the difference between the theoretical and actual water temperature value is greater than 2°C

    Smart Mode

    Average speed of compressor and blower
    Ideal for regular use of the pool during the swimming season
    Very low power consumption and noise emission
    Automatic adjustment of compressor and blower speed to the water temperature

    Power mode

    High compressor and blower speed
    Ideal for heating the water very quickly at the start of the swimming season
    Maximum heating power

    Notice: https: //www.indoordiscount.com/img/cms/Heatermax 20 40 70 INVERTER.pdf

    • Consumption
      over 3 kw/h
    • Type
      Other pump
    • Trier ses déchets

Our customers also liked